Precision Flight Serial CAT II and Microsoft Flight Simulator 9 (2004) - Manual (Page 9)

CAT 2 System and FS2004 Set Up Guide 9 | P a g e
Aileron Calibration
3. Now click on Select button under the Aileron Axis. This should say Set Automatic now.
4. Turn your yoke all the way to the Left and hold it. Click on the Set left most limit.
5. Turn your yoke all the way to the Right and hold it. Click on the Set right most limit.
Elevator Calibration
6. Now click on Select button under the Elevator Axis. This should say Set Automatic now.
7. Pull your yoke all the way to the out and hold it. Click on the Set nose up limit.
8. Push your yoke all the way forward and hold it. Click on the Set nose down limit.