Precision Flight Serial CAT II and Microsoft Flight Simulator 9 (2004) - Manual (Page 14)

CAT 2 System and FS2004 Set Up Guide 14 | P a g e
Additional Options
1. On the Consoles page, please check the box for Parking Brake is a switch.
2. Also on the same Consoles page, please increase the Trim Sensitivity from 16 to 55. This box is
located on the right hand side.
3. Check the box for the Separate left and right cowl flaps.
4. Click on the predefined set. This should have changed the Action with PROP etc
5. At this point, please click on OK.
6. Press the ALT key again and go to Flight and then Exit
7. Start Microsoft Flight Simulator again.
8. Start Flying!