Precision Flight Serial CAT II and Microsoft Flight Simulator 9 (2004) - Manual (Page 10)

CAT 2 System and FS2004 Set Up Guide 10 | P a g e
Rudder Calibration
9. Make sure that your Rudder Trim is in the center position.
10. Now click on Select button under the Rudder Axis. This should say Set Automatic now.
11. Push your left pedals all the way to the Left and hold it. Click on the Set left most limit.
12. Push your right pedals all the way to the Right and hold it. Click on the Set right most limit.