How to contact precision digital – Precision Digital PD562 User Manual
Page 6
Nova Multi-Monitoring Software
Instruction Manual
LIM5001_B
Version 1.0a & up
06/09
6
scaling can be established. In addition, pattern features
such as link codes, wait time and zones, and segment
repeat loops may be established.
Segment # Buttons
Pressing any of the segment (SEG #) buttons for either
program will open the Segment Setting window. From
this window, the target set point and segment time for
each segment of both programs may be established.
Note: The segment time is entered in the format of XX.XX, as either
hours.minutes or minutes.hours as defined in the TMU parameter from
the Pattern Info setup button.
Set TS Button
This button opens the Time Signal
Setting window. Here, a segment can
be set to have an active time signal.
When a segment with a time signal
runs, any relay or digital outputs set to
TS will trigger.
Upload/Download Buttons
The Upload button will allow the programs currently
stored in a Programmable Controller to be loaded into
the program editor. The Download button will load a
program in the program editor into a Programmable
Controller for use.
Program Editor Menus
The following menus are located at the top of the
program editor window.
• Pattern
• Up/Download
Pattern
The following options are available from this menu:
1. New to clear current programs being worked on
and begin new program creation.
2. Open
to open a saved program patterns.
3. Save
to save the current program patterns on the
PC for later use in the program editor.
4. Save
As to set a file name and location for
saving the current programs in the editor.
Up/Download
The following options are available from this menu:
1. Upload
to upload programs from a
Programmable Controller into the program editor.
2. Download
to download the programs in the
program editor into a Programmable Controller.
How to Contact Precision Digital
• For Technical Support please
call: (800) 610-5239 or (508) 655-7300
fax: (508) 655-8990
email:
• For Sales Support or to place an order
please
call: (800) 343-1001 or (508) 655-8990
fax: (508) 655-8990
email:
• For the latest version of this manual please
visit
www.predig.com