Electrolux USER MANUAL BUILT-IN ELECTRIC OVEN B5701-5 - Manual (Page 51)

51 What to do if …
What to do if …
If you are unable to remedy the problem by following the above sugges-
tions, please contact your local Service Force Centre.
1
Warning! Repairs to the appliance are only to be carried out by qualified service
engineers. Considerable danger to the user may result from improper repairs.
3
If the appliance has been operated incorrectly, the engineer's visit will be
chargeable, even during the warranty period.
3
Advice on cookers with metal fronts:
Because of the cold surface at the front of the cooker, opening the oven door
during (or just after) baking or roasting may cause the glass to steam up.
Problem Possible cause Remedy
The oven is not heating up The oven has not been
switched on
Switch the oven on.
The clock has not been set Set the clock.
The required settings have not
been set.
Check the settings.
The oven’s automatic cut-out
has been triggered.
See Automatic cut-out
The fuse in the house’s electri-
cal wiring (fuse box) has been
tripped.
Check the fuse. If the fuses trip
repeatedly, please call a quali-
fied electrician.
The oven lighting is not oper-
ating
The oven light is broken. Change the oven light bulb.
A fault code that is not listed
above appears in the clock
display
Electronic fault Switch the appliance off and on
again via the house fuse or the
safety switch in the fuse box.
If it is displayed again, please
contact the Customer Care De-
partment