Meliconi Gumbody Facile 3 web User Manual

Page 6

DELETING ALL THE LEARN COMMANDS

All the signals captured with the

LEARN

function can be deleted by setting the

9000

code on any of

the device selection buttons. This will restore the original commands on the buttons.

HOW TO CONTROL MELICONI AUDIO VIDEO ACCESSORIES

The

Facile 3 web is already programmed to control the Meliconi Ghost Motor 100 motorised wall brackets and

the Meliconi Light Kit lighting strips. Simply set the code 4000 on one of the device selection buttons. To fi nd

out which buttons are linked to the functions available, consult the online product guide in the

www.meliconi.

com/guide website.

MEMO FUNCTION

The

MEMO function enables you to record a sequence of commands and to recall them by pressing a single

button. Example: turn on the

TV, turn on the DVD, play a video, etc. To access this function, consult the online

guide in the

www.meliconi.com/guide website.

AUDIO CONTROL

When you select a device that does not have its own audio controls, if you press the

V+, V- and Mute buttons the

audio on the device memorised as

TV will be commanded.

This setting can be changed by linking the audio commands of a different device to the

V+, V- and Mute buttons.

To do this follow the simple procedure outlined in the online guide in the

www.meliconi.com/guide website.

Learning all the functions from a new remote control not yet included

in the Facile 3 web databank

With the Facile 3 web you can create up to

completely empty

keypads

so that in

LEARN

mode a total

of up to

new commands can be obtained.

Having constructed one of these keypads with the LEARN commands you can deactivate it by setting

another code on the device selection button and then recalling it exactly as it was by resetting the 8x00

code on the same or another device selection button.

1. Follow the code entry procedure using one of the

following codes:

8000, 8100, 8200, 8300, 8400.

2. To acquire and save signals from one or more original

remote controls follow this procedure .

HOW TO ACTIVATE ADDITIONAL COMMANDS

For lesser used functions, fi nd the additional commands by consulting the

www.meliconi.com/guide website.

Using the online guide, as well as fi nding the code required to programme your remote control, you can also fi nd

descriptions of which

Facile 3 web remote control buttons correspond to the additional commands you require.

You can save additional commands on the

F1 - F2 - F3 - F4 function buttons.

This manual is related to the following products:

Gumbody Universal 5 web