Phase 3 - assembly of steel structure (element 1) – MCZ Picasso User Manual
Page 9
INSTALLATION AND USE MANUAL
Chapter 3
PICASSO
page
9
3
Technical service – all rights reserved by mcz spa
Reproduction prohibited
3.4. PHASE 3 - ASSEMBLY OF STEEL STRUCTURE (element 1)
N.B. USE CARE IN HANDLING ALL COMPONENTS THAT ARE PAINTED BLACK AND COPPER EFFECT
TO PREVENT DAMAGE FROM IRREPARABLE SCRATCHES.
Align the steel structure with the fireplace stove (=axis of cladding) and 5 mm from the latter. Fasten the
structure to the counter-wall using the holes on the sides and top. Use the screws for plasterboard 3.9X35
provided. If the fastening wall is masonry, use inserts instead of screws for plasterboard.
Make sure the structure adheres well to the counter-wall, square and level.
FORO PER
FISSAGGIO
FORO PER
FISSAGGIO
FORO PER
FISSAGGIO