MCZ Picasso User Manual
Page 11

INSTALLATION AND USE MANUAL
Chapter 3
PICASSO
page
11
3
Technical service – all rights reserved by mcz spa
Reproduction prohibited
3.5. PHASE 4 - ASSEMBLY OF LH AND RH SIDE FRAMES (elements 2 and 3)
Set the side frames (rh and lh) on the counter-wall with the inner side resting on the steel structure.
If you have not already done so in phase 2, drill holes at the M6 threaded bars and fasten the two side frames
(rh and lh)
using the screws, nuts and washers provided. For greater safety, you should use two nuts for each
threaded bar (nut and locking nut).
Make sure that the three assembled components adhere well to the counter-wall, and that they are square and
level.
MURO PERIMETRALE
SICUREZZA
DISTANZA DI
MURO PERIMETRALE
ASSE RIVESTIMENTO=
ASSE TERMOCAMINO
694
3
180
180
3
1422
1489
1060
60
FISSAGGIO
DADO-CONTRODADO