Emergency treatment – MCZ Boxsystem 75 FR User Manual
Page 34
Chapter 5
INSTALLATION AND USE MANUAL
page
34
Operation
Technical service – MCZ S.p.A. all rights reserved - Reproduction prohibited
Follow this procedure to personalize the code:
• Disconnect the control unit plug from the power outlet
• Open the battery compartment of the radio remote control by
operating on the door in the direction of the arrow
(figure 10)
• Raise any one or more of the 10 white keys as shown in the
example in
figure 11
• Close the radio remote control
• Press and hold pressed the red button of the radio remote
control and simultaneously reconnect the plug to the power
outlet.
• After a maximum time of 15 seconds, one prolonged beep or a
series of beeps in sequence will confirm the successful
connection between the radio remote control and the control
unit with the new code.
5.8. EMERGENCY TREATMENT
If for any reason the fire needs to be suddenly and quickly put out or a
fire in the chimney flue needs to be put out, proceed as follows:
• If time allows, remove the embers and ashes, using a metal
container.
• Put the fire out rapidly by means of a dry carbon dioxide (CO
2
)
extinguisher.
Switch inside the battery compartment of the
radio remote control