MCZ Scenario Forma 95 GAS Left - Manual (Page 9)

INSTALLATION AND USE MANUAL Chapter 2
SCENARIO pag. 9
Chapter 2 Technical service – all rights reserved by MCZ
GROUP spa. Reproduction prohibited
3.3. PREPARING CONNECTION OF TV AND DEVICES
Before assembling the Scenario cladding, perform the preparations for the domestic
system in order to make all the devices work which you wish to use.
MCZ SHALL NOT BE LIABLE FOR DAMAGE CAUSED BY INCORRECT CONNECTIONS OR
THOSE CARRIED OUT BY UNQUALIFIED PERSONNEL
The TV supplied is prepared for connection with various devices using the wiring provided, already mounted in
the cladding frame, which should be connected to the back of the LOEWE TV and domestic system.
The terminals with the letter “A” must be wired to the LOEWE TV, the terminals with the letter “B” are wired to
the drawer and the terminals with the letter “C” are to be wired to the domestic system. The table below lists the
terminals to be wired.
POS. TERMINAL POS. TERMINAL
1A Male IR repeater socket 1B Female IR repeater socket
2A Male white/red RCA 2C Male white/red RCA
3A Schuko three-pole plug 3B Schuko plug
4A Male HDMI 1 4B Male HDMI 1
5A Male HDMI 2 5B Male HDMI 2
6A Male VGA 5B Female VGA
7A Male USB 7B Female USB
8A Male TV antenna 8B Male TV antenna
9C Telephone 9B Telephone
10C Male TV antenna 10B Female TV antenna
11C SAT antenna 11B SAT antenna
12A SAT antenna 12B SAT antenna + male connector
Using these cables it is possible to connect to the TV:
-a satellite decoder (prepared for satellite antenna and telephone cable for Pay TV),
- DVD readers (connection to the TV through HDMI technology),
- USB keys, cameras, video cameras, MP3 readers (connection through USB port),
-Dolby surround, home theatre (preparation with RCA attachments),
-personal computer (the TV can become a PC monitor through VGA cable).
Diagram of supplied wiring