MCZ Toba HYDRO 22 - Manual (Page 32)

30
6 - INSTALLATION AND ASSEMBLY
LOADING THE PELLETS
Fuel is loaded from the upper part of the stove by lifting the door. Pour the pellets into the tank.
This is easier if performed in two steps:
Pour half of the contents into the tank and wait for the fuel to settle on the bottom.
Then pour in the rest.
Never remove the protection grid inside the tank. When loading, do not let the pellet bag come into contact with
hot surfaces.
No other type of fuel other than pellets is to be inserted into the tank, in compliance with above-mentioned
specifications.
Store the spare fuel at an adequate safe distance.
Do not pour pellets directly onto the brazier but only into the tank.
Most of the stove surfaces are very hot (door, handle, glass, smoke outlet pipes, tank door etc.), therefore it is
recommended to avoid coming into contact with these parts without appropriate protective clothing.