5 - positioning – MCZ Toba HYDRO 22 User Manual
Page 23
21
H
S
J
J
5 - POSITIONING
Technical Dept. - All rights reserved - Reproduction is prohibited
The product, as indicated in figure 1 consists of a single packaged unit.
After removing all the packaging, check that the stove is complete and not damaged. If in doubt, contact the retailer.
Therefore, the end user is responsible for product storage, disposal or possible recycling in compliance with the relative applicable laws in
force. Do not store the unit/stove or its cladding without their packaging.
Position the stove and connect it to the flue pipe. Use the four adjustable feet (J) to get the stove correctly levelled so that the smoke outlet
(S) is lined up with the connecting pipe (H).
If the stove needs to be connected to an outlet pipe which goes through the rear wall (to connect to the flue), take utmost care to make
sure that the joint is not forced.
If the stove smoke outlet is forced or used improperly to lift it or position it, the operation of the stove can be
damaged irreparably.
1. Turn the feet clockwise to lower the stove
2. Turn the feet counterclockwise to lift the stove