MCZ Flair - Manual (Page 23)

21
6-INSTALLATION AND ASSEMBLY
Technical Dept. - All rights reserved - Reproduction is prohibited
CONNECTION OF THE SMOKE OUTLET PIPE
You can choose whether to release the smoke on the rear part or upper part of the product.
If you wish to connect the smoke outlet to the upper part, remove the cap with the three screws from under the top. Then insert the
pipe until it engages with the smoke fitting.
REMOVE THE CAP FASTENED TO THE STRUCTURE OF THE PRODUCT WITH THREE
SCREWS FROM UNDER THE TOP.
INSERTING THE PIPE FOR THE UPPER SMOKE OUTLET.