MCZ Ego 2.0 AIR - Manual (Page 49)

26
°C
47
13-REMOTE CONTROL MAX
Technical Dept. - All rights reserved - Reproduction is prohibited
Room ventilation
Room ventilation can be adjusted as desired in all 4 operating modes described above (Manual, Automatic, Timer, Eco). Simply perform
this operation: from the basic display, press key D to access the VENTILATION adjustment mode (Fig. 6). Then press key C (arrows) to set the
desired ventilation by selecting one of the 5 levels available, independent from the flame level.
The “auto” option can also be selected, which automatically links the room ventilation speed to the flame level.
In short:
flame set on 1 > ventilation set on 1; flame set on 3 > ventilation set on 3; flame set on 5 > ventilation remains set on 3 (for silent
operation as it is in automatic mode).
In products with 2 room fans (comfort air models) via key D one can scroll and set the speed of the individual fans (identified with 1 or 2
above the level bars).
NOTE: In the event a replacement remote control is purchased, if you need to change the default setting, proceed as
follows: with the remote control switched on press buttons D + E at the same time for 10 seconds (until the flashing
number appears). Press key C to select 1 or 2 according to the product to which the remote control is to be paired, and
press E to exit.
IMPORTANT! Choosing the right number of fans can become a decisive factor to ensure the stove works correctly. Therefore
ensure an authorised technician conducts the settings.
The list of fans in place is shown in the table:
STOVE MODEL NO. OF FANS
EGO/STAR AIR 1
EGO/STAR COMFORT AIR 2
FIG.6