MCZ Ego 2.0 AIR - Manual (Page 40)

1
2
W
W
360°
s
s
38
9-CLEANING THE EGO STOVE T-FITTING WITH UPPER OUTLET
EGO stove rear panel with upper outlet
To allow the T-fitting of the stove to be easily cleaned without disassembling the stove, remove the knockout hole “W”. Then remove the
two screws “s”, rotate the panel “W” 360° and secure it to the stove using the previously removed screws “s”.
If the cleaning operations cannot be performed through this panel, due to the stove installation space, they can also be performed by
removing the side of the stove.
T-FITTING