MCZ Ego 2.0 AIR - Manual (Page 33)

t
p
r
z
D
s
31
5-STAR STOVE ASSEMBLY
Technical Dept. - All rights reserved - Reproduction is prohibited
To mount the upper panel “D” follow the steps applied for the lower panel (described in the previous paragraph):
• take another panel “D”
• insert the holes “u” of the bracket on the panel and insert them on the hooks “z” in the bracket “t”
• loosen screw “p”
• remove the bracket “t”
• move the panel “D” towards the structure
• mount the bracket “t” again by tightening the screw “p”
Follow the same steps to install the panels on the other side of the stove.
Attention!!
In order to prevent the ceramic panels from vibrating, firmly press the bracket “t” against the panel so that the
rubber pads adhere as much as possible to the ceramic.