Epson PictureMate PM290 - Manual (Page 32)

32 Printing with BLUETOOTH PictureMate PM 260 / PM 290
Making settings
1. Press x Menu.
2. Select Setup, then press OK.
3. Select Bluetooth, then press OK.
4. Select Bluetooth Setup, then press OK.
Set the BT Device Name, BT Comm Mode and
Encryption. See “Outline of settings” on page 31
for information about BLUETOOTH settings
except Passkey setting. See the “The
BLUETOOTH Passkey Setting” on page 33 to set
the Passkey.
BT Comm Mode Discoverable This mode allows devices
enabled with
BLUETOOTH to freely
discover the printer and
print.
Not Discoverable This mode prevents
unknown devices from
discovering the printer.
To print in this mode, first
search for the printer
once in Discoverable
mode. After your device
has discovered the
printer in Discoverable
mode once, it will
subsequently be able to
communicate with and
print from it in this mode.
Pairing This mode requires that
the four-digit Passkey be
entered into a device
before it can
communicate with and
print from the printer.
Encryption On/Off
(Default = Off) Select On to encrypt
communication.
Encryption requires that
the four-digit Passkey be
entered into a device
before it can
communicate with and
print from the printer.
Passkey Any four-digit
number
(Default = 0000)
The Passkey setting
allows you to set the
four-digit Passkey that
must be entered into a
device before printing if
Pairing is selected as the
BT Comm Mode or if
Encryption is On.
BT Device
Address Set at the factory
(Example)
11-11-11-11-11-11 Displays the unique
BLUETOOTH Device
Address of the printer.