Epson PictureMate PM290 - Manual (Page 28)

28 Printing From an External Device PictureMate PM 260 / PM 290
6. If you see this screen, you are ready to choose
and print photos. See “Basic Photo Printing” on
page 20 and print your photos.
Printing From a PictBridge-Enabled
Camera
You can connect your PictBridge- or USB DP-enabled
digital camera to the back of PictureMate and use the
camera to control printing. (See your digital camera's
documentation to see if it supports the PictBridge
standard or USB DP.)
1. Make sure PictureMate is on.
2. Make sure there are no memory cards in
PictureMate's slots. The memory card light should
be off.
Note:
If a memory card is inserted, the printer will read
photos from the card, not from a camera.
3. Press x Menu.
4. Select Setup, and then press OK.
5. Select Direct Print Settings, and then press OK.
6. Select the setting you want to make, and then
follow the on-screen instructions to make the
settings.