Epson L805 - Manual (Page 11)

Buttons and Lights
Buttons
A Turns the printer on or off.
Do not turn off while the power light is flashing (while the printer is operating or processing
data).
Unplug the power cord when the power light is off.
B Hold this button down for more than three seconds to make Wi-Fi auto setup by using a WPS
button on your access point. See the Network Guide for more details.
C ❏ When a network error occurs, hold this button down for more than three seconds to clear the
error.
❏ Prints the network status sheet allowing you to check the network settings and connection
status. The PIN code for PIN Code Setup (WPS) is also printed.
D Hold this button down for more than three seconds to run print head cleaning.
E ❏ Loads and ejects paper while the printer is not printing.
❏ Clears print job during printing.
❏ Clears paper and CD/DVD tray errors.
Additional functions are available with different combinations of buttons.
+ Turn the printer on while holding down the I button to print the nozzle check pattern.
+ Hold down the and buttons simultaneously for more than three seconds to start PIN
Code Setup (WPS). See the Network Guide for more details.
+ Turn the printer on while holding down the button to restore the default network settings.
Lights
A On when the printer is on. Flashes while the printer is operating or processing data.
B On while Wi-Fi is enabled, or flashes
while communicating.
The and lights flash alternately or
simultaneously while initializing or making
network settings.
C Flashes when a problem with the
printer's wireless (Wi-Fi) network
connection occurs.
User's Guide
Printer Basics
11