Epson EB-1460Ui - Manual (Page 22)

Installation Guide
21
When the Touch Unit is installed (side)
[Unit: mm]
100.8
30
Touch Unit Bracket weights approximately 750 g.
Attached labels
The Touch Unit is a Class 1 laser product that conforms to the IEC/EN60825-1:2007 standard.
There are warning labels affixed to the Touch Unit to indicate that it is a Class 1 laser product.
The labels contain the following information.
• Class 1 laser product
• Warning: Do not open the case. The device contains a high power laser product.
• Warning:
• Caution: If this section is opened, class 3B invisible laser radiation will be emitted.
• Avoid exposure to the radiation beams.
Laser diffusion port
The laser beam is diffused from the laser diffusion ports at the back of the Touch Unit.