Powerfix Energy-Saving Light - Manual (Page 6)

6 GB/IE
Introduction / Safety information Introduction
Energy-Saving Work Light
Introduction
Congratulations on your new product.
You have selected a high quality product.
The instructions for use are a part of this
product. They contain important information about
safety, use and disposal. Before using the product,
please familiarise yourself with all the operating and
safety instructions. Only use the product as described
and for the indicated purpose. When passing this
product on to others, please be sure to include all
its documentation.
Intended use
The energy saving work light is intended for illumi-
nation indoors and outdoors. The energy saving
work light was developed for private use and is not
designed for commercial use. Any other use not
specified above is prohibited and will result in dam-
age. Failure to follow the safety notices may result in
life-threatening situations and injuries, as well as
technical malfunction (electric shock, short circuit,
fire, etc.).
Scope of delivery
Check that all the items are present and that the
device is in perfect condition immediately after
unpacking the device.
1 Energy saving work light
3 Energy saving light bulbs 20 W
1 Carrying handle
1 Set of operating instructions
Technical Data
Model: ES3600
Rated voltage: 220-240 V AC
Rated frequency: 50 Hz
Product: Energy saving work light
Protection type: IP 44
Dimensions
(h x w x d):
approx. 280 x 350 x 180 mm
Illuminant: energy saving light bulbs
Lampholder: E27
Output:
3 x 20 W, 220 - 240 V, 50 Hz
6400 K
non-dimmable
Protection class: (lamp)
Item no.: 10221
Cable: H05RN-F 2G1.0
Symbol Signal word / Meaning
DANGER:
Substantial risk of injury to persons or danger to life if disregarded
WARNING:
Moderate risk of injury to persons if disregarded
IMPORTANT:
Imperative to remember
DANGER:
Danger to life by electric shock
NOTE:
More details
1 m
Maintain adequate distance (at least 1 m) from illuminated surfaces.
94089_Energiespar-Arbeitsleuchte_content_GB.indd 6 10.12.13 07:19