Elmo PTC-200C - Manual (Page 16)

- 15 -
[3] Operating PAN/TILT
• While watching the screen, press any of
(UP, DOWN, LEFT, RIGHT)
direction buttons for the direction in which
you want to watch the image.
• To change the direction minutely, jog the
direction button. To change the direction
largely, hold down the direction button.
• Two operation modes are available
according to the speed: AUTO mode
changing the speed according to the zoom
position, and MANUAL mode setting the
10
15
10
11
speed manually. (Refer to the settings in the OSD Menu screen.)
• When HOME button is pressed, the Camera turns to the front (and the lens
moves to the WIDE side).
• If the Camera direction is changed manually by mistake, press RESET
button. Then, the Camera remembers the last PAN/TILT position in memory.
15
11