Powerfix Halogen Lamp - Manual (Page 7)

7 GB
Tighten the set screw 1 of the flood light
housing 3 .
ATTENTION! Do not overtighten the set
screw
1 , otherwise the glass may be damaged.
Start-up
Switching the halogen flood
light on and off
Insert the mains plug into the mains socket
(220–240 V ∼). The flood light is now switched
on.
Pull out the mains plug from the socket. The
flood light is now switched off.
Note: The tripod 6 features an integrated cable
holder 7 , in which you can store the cable safely,
when it is not required.
Swivelling the halogen light
Undo the middle screw head 9 .
Swivel the halogen light into the desired position.
Retighten the middle screw head 9 .
Changing the bulb
RISK OF BURNS! Ensure that the lamp has
been switched off and has cooled down before
touching it, to avoid burns. Bulbs develop a lot
of heat in the area of the lamp holder. Parts
1 – 5 are also exposed to strong heat. Allow
the light to cool down for at least 15 minutes
before replacing a defective bulb.
Remove the plug and wait until the appliance
has cooled down to room temperature.
Loosen the set screw 1 of the flood light hous-
ing 3 , which holds the hinged front lid 2 in
place.
Swing the front lid 2 downwards.
Remove the damaged bulb from the bulb holder.
Carefully bring the new bulb 4 into its position
between the two spring loaded fittings 5 .
Ensure that there is good contact on both sides.
ATTENTION! When inserting the bulb 4 , be
careful not to touch the glass of the bulb 4 . If
you accidentally touch the bulb 4 , clean it
with a lint free cloth and a bit of denatured
alcohol, before you fit it.
Lift the hinged front lid 2 up.
Tighten the set screw 1 of the flood light
housing 3 .
Maintenance and Cleaning
Allow the light to cool down completely.
DANGER TO LIFE BY ELEC-
TRIC SHOCK! For electrical safety reasons,
never clean the light with water or other fluids
nor immerse it in water. When cleaning, only
use a dry, lint-free cloth.
Do not use solvents, petrol or the like.
Guarantee and Service
This product has a 3 year guarantee from the date
of purchase extended only to the original buyer,
not transferable. Please keep your receipt as proof
of purchase. The guarantee applies to material or
manufacturing defects only. It does not cover wear
items or damage caused by improper use. Any
modifications will void the guarantee. This warranty
does not limit your legal rights. In the event of a
warranty claim, please contact the service centre.
This is the only way to return your device free of
charge.
Service address
Please contact us before returning the defective
product, we will gladly also call you back! The
guarantee will only be honoured if the defective
appliance is accompanied by a copy of the receipt.
We cannot accept parcels sent carriage forward,
please request a return label.
Before Initial Use / Start-up / Maintenance and Cleaning / Guarantee and Service