Extron electronic 6400s - Manual (Page 58)

Reference Information, cont’d
Matrix 3200/6400 Series • Reference Information A-2
Reference Information
Matrix 3200/6400 Series Part Numbers
Part Numbers for Matrix 3200/6400 switchers use the following format:
60-25x-iofr
where: x = 0 = Matrix 6400 Wideband
x = 1 = Matrix 3200 Wideband
x = 2 = Matrix 6400 Video
x = 3 = Matrix 3200 Video
x = 4 = Matrix 6400 Sync
x = 5 = Matrix 3200 Sync
x = 6 = Matrix 6400 Audio
io = Inputs/Outputs (Matrix size). The i and the o are replaced
by two characters which identify the exact size of the Matrix.
f = Front Panel Controller (FPC-1000)
f = 0 = No, f = 1 = Yes
r = Redundant Power Supply
r = 0 = No, r = 1 = Yes
An example of a typical Matrix 3200/6400 part number is: 60-250-HD11
In this example: x = 0 = Matrix 6400 Wideband
io = HD = 64x32 which was obtained from the Matrix 6400
Wideband Part Number Table on Page A-3 as illustrated below.
The vertical column identifies i (# of Inputs) and the horizontal
row identifies o (# of Outputs).
f = 1 = yes = Front Panel Controller
r = 1 = yes = Redundant Power Supply
For the example above, the io characters would be BA for matrix size 32x8, DD for
matrix size 32x32 and PH for matrix size 64x64.
The Matrix 3200 Wideband and Matrix 6400 Audio io characters are selected using
the same procedure as is used with the Matrix 6400 Wideband, but with different
tables as shown on Page A-3.
The io characters for the Matrix 3200 Sync part number are DD as it is only
available in one matrix size, 32x32. The io characters for the Matrix 6400 Sync part
numbers are PH as it is also available in only one matrix size, 64x64. Either of the
two Sync part numbers may include r = 0 or 1 but f must be 0 as a Sync module
cannot have a Front Panel Controller.
Matrix 3200/6400 Part Numbers (with matrix tables) are shown on Page A-3.
AA
AB
BC
BD
CE
CF
DG
DH
BA
BB
DC
DD
FE
FF
HG
HH
CA
CB
FC
FD
LG
LH
DA
DB
HC
HD
LE
LF
PG
PH
16 32 48 64
8
16
24
32
40
48
56
64