Powerfix Z30590-BS - Manual (Page 12)

12 GB
Use / Maintenance and cleaning / Troubleshooting
m ATTEnTIOn! Remember to close the protective rubber pad 5
before use, otherwise water may flow into the DC pin when using
the LED work lamp in an outside area.
m ATTEnTIOn! If the LED work lamp is connected to the mains supply
via an adapter, it is only suitable for indoor use.
Q
Maintenance and cleaning
The product requires no maintenance. The LEDs cannot be replaced.
J Disconnect the product from the power supply before you clean it.
j Clean the product regularly with a dry, fluff-free cloth. Use a slightly
moist cloth to remove any stubborn dirt.
j Do not use corrosive cleaning agents.
J Never immerse the product in water or other liquids.
Q
Troubleshooting
Fault Possible causes and cures
No
functions - Is the mains adapter or cigarette lighter socket adapter
fully inserted?
Charging
indicator
does not
light up When connected to a cigarette lighter socket:
- Is the cigarette lighter socket supplied with power?
Some cigarette lighter sockets only supply power with
the ignition switched on.
- Check the fuse in the vehicle.