Silvercrest SKMH 1100 A1 - Manual (Page 102)

100
11.2 Error code in display
Unable to select a
temperature You have selected a speed
in the range 4 – 10 Select a speed in the range 0 – 3
(see “6.6 Setting the speed” on
page 86)
It is not possible to select
a speed higher than 3. A temperature is currently set Set the temperature to 0
Display Cause Solution
E3
Blender jug 6 is too full Remove some of the contents
The lid of the blender jug 6
is not properly closed Close the lid properly (see
“7.5 Positioning the lid of the
blender jug” on page 89)
HHH The blender jug 6 is not
correctly positioned in the
base unit 17 Position the blender jug 6
correctly (see
“7.3 Positioning the blender
jug” on page 88)
The blender jug 6 was
removed while the appliance
was in operation Stop the appliance before
removing the blender jug 6
(see “6.7 Starting and
stopping the appliance” on
page 86)
LLL Fault in the logic circuitry Contact the Service Centre
(see “Service Centre” on
page 102)
Selected temperature has
been reached (see
“6.4 Setting the
temperature” on page 85) None required
Malfunction Cause Solution
RP93471 Küchenmaschine mit Heizung LB5 Seite 100 Donnerstag, 14. August 2014 3:36 15