Echo GT-2000EZR - Manual (Page 6)

6
D
ESCRIPTION
The ECHO product you purchased has been factory pre-assembled for your convenience. Due to packaging restrictions,
shield installation and positioning of the front handle are necessary.
After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missing
parts. Use the contents list to check for missing parts.
E
MISSION
C
ONTROL
EPA Phase 2
The emission control system for this engine is EM (Engine Modifica-
tion).
Emission Control Label located on Engine
(EXAMPLE ONLY, information on label varies by FAMILY).
SAFE OPERATION
WARNING DANGER
Do not operate this product indoors or in inadequately ventilated
areas. Engine exhaust contains poisonous emissions and can cause
serious injury or death.
• Provide all operators of this equipment with the Operator's Manual
and instructions for safe operation.
Keep A Firm Grip
• Hold the front and rear handles with both hands with thumbs and
fingers encircling the handles
Keep A Solid Stance
• Maintain footing and balance at all times. Do not stand on slippery,
uneven or unstable surfaces. Do not work in odd positions or on
ladders. Do not over reach.
IMPORTANT ENGINE INFORMATION
ENGINE FAMILY: 2EHXS.0214RA DISPLACEMENT: 21.2 CC
EMISSION COMPLIANCE PERIOD : 300 hours
THIS ENGINE MEETS U.S. EPA PHASE 2 EMISSION REGULA-
TIONS FOR SMALL NON ROAD ENGINE. REFER TO
OWNER'S MANUAL FOR MAINTENANCE SPECIFICATIONS
AND ADJUSTMENTS.
PRODUCT EMISSION DURABILITY
The 300 hour emission durability compliance period is the time span selected by the manufacturer certifying the
engine emissions output meets applicable emissions regulations, provided that approved maintenance procedures
are followed as listed in the Maintenance Section of this manual.