Ericsson W21 - Manual (Page 76)

Jan 1 00:07:34 FWT user.notice kernel: Type: Direct-Access
ANSI SCSI revision: 00
Jan 1 00:07:35 FWT user.notice kernel: SCSI device sda: 4013056
512-byte hdwr sectors (2055 MB)
Jan 1 00:07:35 FWT user.notice kernel: sda: assuming Write
Enabled
Jan 1 00:07:35 FWT user.err kernel: sda: assuming drive cache:
write through
Jan 1 00:07:35 FWT user.notice kernel: SCSI device sda: 4013056
512-byte hdwr sectors (2055 MB)
Jan 1 00:07:35 FWT user.notice kernel: sda: assuming Write
Enabled
Jan 1 00:07:35 FWT user.err kernel: sda: assuming drive cache:
write through
Jan 1 00:07:35 FWT user.info kernel: sda1
Jan 1 00:07:35 FWT user.notice kernel: Attached scsi removable
disk sda at scsi0, channel 0, id 0, lun 0
• Restart the Ericsson W21.
• Disconnect the USB device from the Ericsson W21, and then reconnect
it.
• Make sure that the PC belongs to the same workgroup as the Ericsson
W21. For instructions, see section 3.3.1 – Check Workgroup Settings.
The Ericsson W21 workgroup is displayed on the Sharing web page.
• If you have problems accessing a printer, make sure that the printer
drivers are correctly installed on the PC.
74 1/1551-CRH 102 167 Uen Rev D 2007-11-16