Silvercrest SWR 300 A1 - Manual (Page 90)

SilverCrest SWR 300 A1
88 - English
Configuring WAP mode
WAP mode (Wireless Application Protocol) is used to extend your network or to make your
network available in another location.
Set up WAP mode as follows:
 Plug the wireless repeater into a suitable power socket.
 Connect a network cable to the LAN socket (6) of the wireless repeater. Insert the other end of
the network cable into a free LAN socket on your computer.

Click on Wizard on the Home
page of the wireless repeater's
configuration menu and select
WAP mode. Then click on Next.

Here you can determine the
SSID (network name) and the
Security mode. In Security
mode, select the desired form of
encryption (WPA, WPA2 or
WPA/WPA2 mixed). If the
encryption is activated, the
password must be entered.
You can specify the SSID of the router and thereby extend the
network or set-up an independent Access Point. When entering the
router's SSID, ensure that this corresponds to the encryption of the
router.