beautypg.com

Operational safety, Cables – Silvercrest SWR 300 A1 User Manual

Page 85

background image

SilverCrest SWR 300 A1

English - 83

Ensure that

 no direct heat sources (e.g. heating) can affect the device;
 no direct sunlight or bright artificial light reaches the device;
 the device is not in the immediate vicinity of magnetic fields (e.g. speakers);
 no fire sources (e.g. burning candles) are placed on or near the device;
 no foreign objects penetrate the device;
 contact with sprayed and dripping water and corrosive liquids is prevented and the device is

never operated near water; in particular it should never be immersed (do not place any objects

filled with liquids such as vases or drinks on or near the device);

 the device is not subjected to any extreme temperature fluctuations, as this may result in moisture

caused by condensation and therefore a short circuit;

 the device is never subjected to excessive shocks and vibrations;

Operational safety

 Only connect the wireless repeater to a freely accessible mains socket so that it can be quickly

disconnected from the mains in the event of danger (smoke, fumes or smell of burning).

 Disconnect the wireless repeater from the mains if the device will not be used for a prolonged

period (e.g. during holidays). Even if the device is not being used, it consumes electricity. This

minimises the risk of fire or smouldering which always exists when an electrical device is

connected to the mains power supply.

 Always disconnect the wireless repeater from the mains power supply before a storm or

thunderstorm if there is the risk of lightning, as the wireless repeater can be irreparably damaged

by high voltage surges if lightning strikes.

 Never use any adapter plugs or extension cables which are damaged or which do not comply

with valid safety standards.

Cables

Always handle the cables by the connector and do not pull on the cables themselves. Never place

furniture or other heavy objects on the cable and take care that the cable is not kinked, especially

near the plug and connection sockets. Never make knots in any of the cables or tie them together