Silvercrest SWR 300 A1 - Manual (Page 89)

SilverCrest SWR 300 A1
English - 87
Opening the configuration menu
The following describes the set-up in Windows ® 7. The settings in other operating systems may
differ. Open the Internet browser on your computer. Enter http://192.168.10.1 in the address
line of the Internet browser and confirm the entry with the Enter button.
The following window will open. Enter
admin as user name and password
and then click on OK. The
configuration menu of the wireless
repeater will then open.
If the user name and password window does not open hold down the reset
button (7) for at least 10 seconds and repeat the procedure described above.
Setting the menu language
The default menu language is English. Proceed as follows to change the menu language:
Select the Management tab. Select
the desired language under Select
Language. Finally click on Apply
Settings to confirm the settings.