Silvercrest SDTS 300 A1 - Manual (Page 45)

43 GB
Observing the area outside the door
• Press the ON/OFF 7 button. The
monitor is switched on and allows a
view of the area outside the door.
• The monitor switches off automatical-
ly after approx. 30 seconds.
Switching the bell off
If you do not want to be disturbed, you can switch off the bell of
the device.
1. If the monitor 1 is switched off, press the ON/OFF 7 button
until the pilot lamp next to it is lit (approx. 3 seconds).
The pilot lamp 2 on the monitor and the pilot lamp 10 on the
bell flash approx. every 5 seconds.
2. Test by pressing the door bell 11. The bell is switched off, the
monitor remains dark.
• In order to switch the bell back on, press the ON/OFF button
until the pilot lamp 2 next to it is lit (approx. 3 seconds). After-
wards, the monitor switches on again for 30 seconds.
8. Cleaning
• Use a soft, dry cloth for cleaning. Do not use any astringent
or abrasive cleaning agents.
100°
__DT73358.BOOK Seite 43 Freitag, 25. Mai 2012 4:30 16