Electrolux 726673 - Manual (Page 13)

13
C.1.1 CONTROL PANEL
2
3
4
1
CATEGORY HUM
HIGH
% SET HACCP
ACCESS TO
FOOD CATEGORIES
HIGH HUM.
ON/OFF
SERVICE
ALARMS
PRINT
TEMPERATURE/
CATEGORY
SELECTION
MANUAL
DEFROST
COMPRESSOR
STATUS
POWER SUPPLY
STATUS
HACCP
ALARMS
7 DAYS
REPORT
POWER ON/OFF
1 - Access to Food Categories button
2 - High humidity ON/OFF button
2a - High humidity indicator light
3 - Service alarms button
3a - Service alarms indicator light
4 - Manual defrost / UP button
5 - Set temperature / Category selection / DOWN button
6 - HACCP alarms button
7 - Display
8 - Compressor status indicator light
9 - Power supply status indicator light
10 - Power ON/OFF button
C.1.2 INITIAL SWITCH-ON AND TEMPERATURE ADJUSTMENT
The appliance features an ON/OFF switch for activating the
appliance.
Turn on the appliance by pressing the ON/OFF button:
To set the chamber temperature, follow these steps:
- press and hold SET/DOWN button for 5 seconds,
SET
the SET POINT value appears on the display
C.1 OPERATIONS and USER
INSTRUCTIONS
the Unit of Measure Indicator light starts flashing.
- To change the SET temperature, press SET/DOWN button or
MANUAL DEFROST/UP button within 15 seconds
SET
or
- To store the new set value, wait until it stops flashing to exit
the program
SET
if a selection is not made after 15 seconds, the last value dis-
played will be confirmed automatically and the chamber tem-
perature display is restored.
Example of setting:
- switch on the appliance
- confirm the set temperature
SET
2 3 5 6 10
1 2a 3a 4 7 8 9