Silvercrest COCOON M1450 TWIN User Manual
Page 34
32
Answering machine
Cocoon M1450 TWIN
An internal voice will add further information, such as day and time of the call.
Info
Messages are played in handsfree mode. Press the pickup call
12
key to swap between handset and handsfree.
9.1
Answering machine status
The display on the handset will indicate how many messages you have received. The
icon is displayed if the answering machine is switched off. The
icon appears when it is
switched on.
‘Memory Full’ will be shown on the display when the internal memory is full and no new
messages can be recorded.
The display backlighting will indicate by flashing that no new messages can be saved to the
answering machine.
9.2
Outgoing messages
You can record two outgoing messages of two minutes each.
•
Outgoing message 1 (OGM1) is linked with the answering machine function and also
offers callers the opportunity to leave a message.
•
Outgoing message 2 (OGM2) is also linked with the answering machine function,
although callers do not have the opportunity to leave messages.
9.2.1 Recording outgoing messages (OGM1 or OGM2)
Info
A message has been stored for outgoing message 1 in the factory,
but you can replace it with your own message.
1. Press
2
.
2. Press
3
or
11
repeatedly, select ‘Ans machine’.
3. Press
2
to confirm.
4. Press
3
or
11
repeatedly, select ‘Outgoing Msg.’.
5. Press
2
to confirm.
6. Press
3
or
11
repeatedly, select ‘Record Message’.
7. Press
2
to confirm.
8. Select ‘Answer & Record’ for outgoing message 1 or ‘Answer Only’ for outgoing
message 2.
9. Press
2
to confirm.
10. Start speaking after the beep and press ‘Save’
2
to confirm. The message will be
played back.
9.2.2 Play back or delete outgoing messages
1. Press
2
.
2. Press
3
or
11
repeatedly, select ‘Ans Machine’.
3. Press
2
to confirm.
4. Press
3
or
11
repeatedly, select ‘Outgoing Msg.’.
5. Press
2
to confirm.
6. Press
3
or
11
repeatedly, select ‘Play Msgs’.
7. Press
2
to confirm.
8. Select ‘Answer & Record’ for outgoing message 1 or ‘Answer Only’ for
outgoing message 2.
9. Press
2
to confirm. The message will be played back.