Silvercrest COCOON M1450 TWIN User Manual
Page 24
22
Handset - settings and operation
Cocoon M1450 TWIN
4.21.1 Programming the direct number
1. Press
2
.
2. Press
3
or
11
repeatedly, select ‘Handset’.
3. Press
2
to confirm.
4. Press
3
or
11
repeatedly, select ‘Direct Call’.
5. Press
2
to confirm.
1. Press
3
or
11
repeatedly, select ‘Edit’.
2. Press
2
to confirm.
3. Dial the telephone number you want to dial out.
1. Press
2
to confirm.
4.21.2 Turning the Direct Call ON/OFF
1. Press
2
.
2. Press
3
or
11
repeatedly, select ‘Handset’.
3. Press
2
to confirm.
4. Press
3
or
11
repeatedly, select ‘Direct Call’.
5. Press
2
to confirm.
6. Select ‘ON’ or ‘OFF’ and press
2
.
Info
If you have turned on the direct call function, you can turn it of by
pressing the
2
and select ‘OFF’.
4.22 Auto Talk
If the handset is in the base unit and an incoming call is received, the call will be picked up
automatically by picking the handset up from the base unit. You can choose whether this
function should be enabled or not.
1. Press
2
.
2. Press
3
or
11
repeatedly, select ‘Handset’.
3. Press
2
to confirm.
4. Press
3
or
11
repeatedly, select ‘Auto Talk’.
5. Press
2
to confirm.
Select ‘On’ or ‘Off’ and press
2
to confirm.’ or
4.23 Resetting the handset settings to “Default”
(Handset reset)
You can reset all handset settings to the factory settings and thereby delete all the entries
from the phonebook, the calls list and the redial memory.
The default settings are as follows:
Base Select:
Auto select
Key Beep:
On
External Melody:
Melody 10
Internal Melody:
Melody 1
Ringer volume:
Volume 3
Earpiece Volume:
Volume 3
Handsfree:
Volume 3