Silvercrest COCOON M1450 TWIN User Manual
Page 32
30
Additional handsets and base units
Cocoon M1450 TWIN
8.3.1 Automatic selection
If you set the handset to automatic selection, the handset will automatically choose the
closest base unit in standby mode:
1. Press
2
.
2. Press
3
or
11
repeatedly, select ‘Handset’.
3. Press
2
to confirm.
•
Press
3
or
11
repeatedly, select ‘Select Base’.
4. Press
2
to confirm.
5. Select ‘Auto’ and press
2
to confirm.
Info
When you have activated Automatic base selection and the handset
is out of range on the current base, the handset will only search for
the strongest base in standby (not during communication).
8.3.2 Manual selection
If you set the handset to 'manual selection', the handset will only search for the base unit you
have set.
1. Press
2
.
2. Press
3
or
11
repeatedly, select ‘Handset’.
3. Press
2
to confirm.
4. Press
3
or
11
repeatedly, select ‘Select Base’ .
5. Press
2
to confirm.
6. Select ‘Manual’ and press
2
to confirm.
7. Select the base unit using
3
or
11
and press
2
to confirm.
Important
The handset must be registered to a base unit before you can select
that base unit.
8.4
Using multiple handsets
Info
The functions described below are only possible if more than one
handset is registered to the base unit.
8.4.1 Calling another handset
1. Press INT
13
.
•
‘Internal’ appears in the display.
2. Select the number of the handset (keys 1-5) you wish to call.
3. When you have completed your call, press
8 to hang up.
8.4.2 Accepting an internal call
•
The internal call icon
and the number of the calling handset appear in the display.
1. Press
12
to pick up the internal call.
OR
1. Lift the handset off its base (as long as the Auto Talk option is enabled, see section
“4.22 Auto Talk”)
•
The handset number of the calling handset and the
icon will appear in the display
during the call.
2. When you have completed your call, press
8 to hang up.