5clock and alarm functions – Silvercrest COCOON M1450 TWIN User Manual
Page 25
23
Cocoon M1450 TWIN
Clock and alarm functions
ENGLISH
LCD Contrast:
6
Time Format:
24 hour
Handset Name:
Handset
Phone Book:
Empty
Calls list:
Empty
Redial list:
Empty
Auto Answer:
Off
To restore the default settings:
1. Press the recall key R
4
and hold for approximately 10 seconds until
‘Handset Reset?’ is displayed.
2. Press
2
to confirm or
14
to cancel or quit the menu without resetting.
5
Clock and alarm functions
5.1
Set the date and time
Info
If you have Caller ID (CLIP) on your telephone line and the provider
sends date and time, your clock will be set automatically on an
incoming call unless you have turned this function off (see “5.3 Auto
update time”). The year is not set automatically.
Once you have set the time on one handset this will be transferred to
all the handsets automatically.
1. Press
2
.
2. Press
3
or
11
repeatedly, select ‘Time’.
3. Press
2
to confirm.
4. Press
3
or
11
repeatedly, select ‘Date and Time’.
5. Press
2
to confirm.
6. Enter the last two digits of the year and press ‘Save’
2
.
7. Enter two digits for the month and press ‘Save’
2
.
8. Enter the day and press ‘Save’
2
.
9. Enter the hour and press ‘Save’
2
.
10. Enter the minutes and press ‘Save’
2
.
Important
The date and time are lost if there is a power failure at the base unit.
5.2
Select hour format
1. Press
2
.
2. Press
3
or
11
repeatedly, select ‘Time’.
3. Press
2
to confirm.
4. Press
3
or
11
repeatedly, select ‘Set Time Format’.
5. Press
2
to confirm.
6. Select the time format (12 hour or 24 hour display) and press
2
.
5.3
Auto update time
Normally the time and day/month is updated by the network. If you want to disable this
function:
1. Press
2
.