Emerson Radio ES3 - Manual (Page 35)

34
To Deactivate The Timer
1.) Press the MODE button on the front panel or the remote control repeatedly
until the “TIMER” indicator is flashing and the “ON” indicator remains ‘On’.
2.) Press the TIMER button on the front panel. Both the “TIMER” and “ON”
indicators will flash together. This indicates that the Timer On time is
deactivated.
3.) Press the MODE button on the front panel or the remote control repeatedly
until the “TIMER” indicator is flashing and the “OFF” indicator remains ‘On’.
4.) Press the TIMER button on the front panel. Both the “TIMER” and “OFF”
indicators will flash together. This indicates that the Timer Off time is
deactivated.
To Reactivate The Timer
1.) Press the MODE button on the front panel or the remote control repeatedly
until the “TIMER ON” indicator is flashing in the display.
2.) Press the TIMER button on the front panel. There is no TIMER button on the
remote control. The “ON” indicator stops flashing and remains ‘On’, but the
TIMER indicator continues flashing. This indicates that the Timer On time is
active.
3.) Press the MODE button on the front panel or the remote control repeatedly
until the “TIMER OFF” indicator is flashing in the display.
4.) Press the TIMER button on the front panel. The “OFF” indicator stops flashing
and remains ‘On’, but the TIMER indicator continues flashing. This indicates
that the Timer Off time is active.
At the selected ‘On’ time the system will turn on automatically to the last function
selected, either TUNER or CD. It will play until it reaches the selected ‘Off’ time
and then shut off automatically.
Note: If the system turns on to CD function it will only play until the end of the disc
and then stop. If you programmed the system to turn on and play for 3 hours
before shutting off, but your CD is only 45 minutes, the system will only play for 45
minutes but the power will remain On for another 2 hours and 15 minutes before
shutting Off automatically.
ES3_ib032103.p65 21/3/2003, 10:31 34