Emerson Radio ES3 User Manual

Page 21

4.) Press the TUNING/SKIP-SEARCH UP

or DOWN

buttons on the top

panel of the main unit or on the remote control to set the display to the correct

minutes.

5.) Press the MEMORY/CLOCK SET button once

more. The time display stops flashing and the

clock begins to run.

Note: You must press the TUNING/SKIP-SEARCH UP

or DOWN

buttons

to adjust the time display within 8 seconds after you press the MEMORY/CLOCK

SET button, otherwise the digits will stop flashing and the time cannot be adjusted.

If this occurs press the MEMORY/CLOCK SET button again to start the display

flashing once more.

VOLUME, BASS LEVEL, AND DYNAMIC BASS BOOST

(D-BASS) CONTROLS

Volume Adjustments

Press the VOLUME UP or DOWN

buttons on the front panel or the remote

control to increase or decrease the volume. The volume level indicator appears in

the main display. The range is from “00” ( Minimum) to “40” (Maximum). The

system remembers the volume level when the power is switched ‘Off’ and returns

to the same level when the power is switched ‘On’ again.

Dynamic Bass Boost Control

Press the BASS BOOST button on the front panel or the remote control to increase

the bass response. The D-BASS indicator appears in the main display. Press

again to cancel the Bass Boost function.

Bass Volume Level Control

Rotate this control on the front panel of the subwoofer to increase or decrease the

amount of bass response from the subwoofer speaker.

ES3_ib032103.p65

21/3/2003, 10:31