Silvercrest Energy Monitor - Manual (Page 23)

25 GB
Operation
16. Press the “SET” button 2 to move to the next digit.
17. Press the “UP” 5 or “DOWN” button 4 to set the
hundreds digit of the current price per kWh in Eurocent (€)
for electricity rate 2. Example: 1.100
18. Press the “SET” button 2 to move to the next digit.
19. Repeat step 17 to set the tens and units digit.
Example: 1.111
20. Press the “SET” button 2 . The time display in the bottom
third of the LC display 1 starts to flash.
21. Press the “UP” button 5 to set the starting time for
electricity rate 2 in hours.
22. Press the “DOWN” button 4 to set the starting time for
electricity rate 2 in minutes.
23. Press the “PRICE” button 3 to confirm your entry. The
power cost meter begins measuring the cost of energy
consumed in electricity rate 2 at the set starting time.
note: These settings affect the “Display energy costs” function.
Q Set electricity flat-rate
If your electricity provider does not offer different electricity
rates (day / night), you can set a flat rate for electricity. The
56861_Energiekostenmessgeraet_Content_GB-PL-CZ-SK.indd 25 26.11.10 10:12