Set the time, Before you start – Silvercrest Energy Monitor User Manual
Page 14
16 GB
Before you start
retighten the two screws firmly.
note: Make sure that you replace the battery compart-
ment cover 21 the right way round. The rounded corners
of the battery compartment cover 21 must fit into the
rounded recesses in the battery compartment.
j
The wattmeter is now ready for operation.
Q
Set the time
The time is displayed as soon as the isolating strip has been
removed. The symbol 15 also appears.
j
Press the “PRICE” button 3 until the time appears in the
bottom third of the LC display 1 .
j
Press the “SET” button 2 for approx. 3 seconds. The
time display flashes.
j
Press the “UP” button 5 to set the hours.
j
Press the “DOWN” button 4 to set the minutes.
j
Press the “SET” button 2 to switch between 12 and
24-hour format.
j
Press the “PRICE” button 3 to confirm your setting.
56861_Energiekostenmessgeraet_Content_GB-PL-CZ-SK.indd 16
26.11.10 10:12