Silvercrest Energy Monitor - Manual (Page 17)

19 GB
Operation
Q Measure power consumption
j
Press the “UP” button 5 until the Watt symbol 8
appears in the top third of the LC display 1 .
j
The LCD 1 now indicates the present power consumption
in W (Watt) required for use of the electrical appliance.
note: the power consumption is calculated according
to the following formula: power = voltage x current x
power factor.
Q Maximum power consumption
j
Press the “UP” button 5 until the Max symbol 20
and the Watt symbol 8 appear in the top third of the
LC display 1 .
j
The LCD 1 now indicates the maximum power consump-
tion in W (Watt) measured by the wattmeter so far.
note: you can also call up the maximum power consump-
tion reading when the wattmeter has been removed from
the outlet or when the electrical appliance you are testing
is no longer connected to the wattmeter.
note: the maximum power consumption is saved until
a higher value is measured. The old value is then over-
written by the new measurement.
56861_Energiekostenmessgeraet_Content_GB-PL-CZ-SK.indd 19 26.11.10 10:12