Silvercrest SBTF 10 C2 - Manual (Page 13)

GB
10 SBTF 10 C2
Coupling the hands-free appliance
with several mobile telephones
You can couple the hands-free appliance with up to
eight mobile telephones. If a further mobile telephone is
coupled with the hands-free appliance, the coupling in-
formation of the fi rst coupled mobile telephone is erased.
However, it can only be connected with one mobile
telephone. When the hands-free appliance is switched
on, within a few seconds it attempts to make a connection
to the last used mobile phone. You will hear a double
beep once the devices have been successfully paired.
Should a connection not be possible, the hands-free appli-
ance nonetheless remains recognisable for other mobile
telephones. To use the hands-free appliance with a linked
mobile phone that is not the last used mobile phone, the
connection must be made manual via the Bluetooth
®
menu of the mobile phone.
Separating the connection
If you wish separate the mobile telephone from the hands-
free appliance, for example, to connect it to another
Bluetooth
® appliance:
Ɣ Switch the hands-free appliance off
or
Ɣ separate the connection over the Bluetooth ® menu
in the mobile telephone.
You need not erase the coupling with the hands-free appli-
ance in the Bluetooth
®
menu to separate the connection.
Re-establishing the connection
If you want to reconnect the hands-free appliance with the
last used mobile phone:
Ɣ Check to see that Bluetooth
®
is activated in the mobile
telephone, then switch the hands-free appliance on.
IB_102629_SBTF10C2_LB4.indb 10 22.05.14 13:20