Silvercrest SIRD 14 B1 - Manual (Page 189)

SilverCrest SIRD 14 B1
English - 187
Alarm
This option lets you set two alarm times. First, verify that the clock is displaying the correct time.
Choose between “Alarm 1” and “Alarm 2”. Then the following options are available:
[Enable:] Now select one of the following options: “Off” (alarm disabled), “Daily”, “Once”,
“Weekends” (Saturday and Sunday), “Weekdays” (Monday to Friday).
If you select “Once”, you need to enter the date and time for the alarm.
[Time:] This lets you set the alarm time. The hour flashes. Rotate the NAVIGATE knob [4] to set the
hour and press the NAVIGATE knob [4] to confirm. The minute flashes. Rotate the NAVIGATE knob
[4] to set the minute and press the NAVIGATE knob [4] to confirm.
“AM” will flash only if you have chosen the 12-hour time format. Rotate the NAVIGATE knob [4] to
select “AM” for the morning hours or “PM” for the afternoon hours and press the NAVIGATE knob
[4] to confirm your selection.
[Mode:] This let you set how you want to be woken up. The following options are available:
“Buzzer”, “Internet radio”, “DAB” and “FM”.
If no Internet connection is available, the buzzer will sound.
[Preset:] This lets you select the radio station you would like to wake you up. You can select the
“Last listened” option or choose a station from your favourite list. Please note that this function is not
available if the “Buzzer” option has been selected.
[Volume:] Rotate the NAVIGATE knob [4] to set the wake-up volume you want. Press the
NAVIGATE knob [4] to confirm.
[Save] Select this option and press the NAVIGATE knob [4] to save the settings. After an alarm
has been enabled, the display [2] shows a bell icon 1 (Alarm 1) or 2 (Alarm 2). In standby mode,
the alarm time set is also shown on the display [2].