Silvercrest SIRD 14 B1 - Manual (Page 156)

SilverCrest SIRD 14 B1
154 - English
interfere with the functionality of the pacemaker. The RF signals transmitted can interfere with
hearing aids. If the wireless mode is switched on, do not place the near flammable gases or in a
potentially explosive area (e.g. a paint shop), as the RF signals transmitted could cause explosions
or fire. The range of the radio wave signals depends on environmental conditions. If data is
transmitted via a wireless connection, it can also be received by unauthorised parties. Targa GmbH
is not liable for any interference caused to RF or TV signals through unauthorised modification to
this device. Furthermore, Targa accepts no liability for replacing any cables or devices that have
not been specifically approved by Targa GmbH. The user is solely responsible and liable for
remedying any interference caused by such unauthorised modification of this device and for
replacing appliances.
Maintenance / cleaning
Repairs are required if this device is damaged in any way, for example, if the power adapter or
device housing is damaged, if liquids or objects have entered the device or if the product has been
exposed to rain or moisture. Repairs are also necessary if the product is not performing normally or
if it has been dropped. If you notice any smoke, unusual noise or strange smells, switch off the
device immediately and pull the power adapter out of the power supply. If this occurs, do not
continue to use the device and have it checked by an expert. All repairs must be carried out by
qualified service personnel. Never open the housing of the device. Only use a clean, dry cloth for
cleaning. Never use aggressive liquids. Do not attempt to open the housing of the device, this voids
your warranty.
Operating environment
The device is not designed for use in environments with high humidity (e.g. bathrooms), and must be
kept free of dust. Operating temperature and operating humidity: 5 ºC to 35 ºC, max. 85 % RH.
Copyright
All the contents of this user manual are protected by copyright and provided to the reader for
information only. Copying data and information without the prior explicit written consent of the
author is strictly forbidden. This also applies to any commercial use of the contents and information.
All texts and diagrams are up to date as of the date of printing. Subject to change without notice.