Silvercrest SSM 550 B1 - Manual (Page 6)

- 4 -
Operation
Warning!
The motor switches itself off as soon as the mixing
jug
e is removed from the motor block u . It could
then be overlooked that the appliance is still swit-
ched on. The motor will thus start of its own accord
as soon as the mixing jug
e is replaced on it:
Therefore:
• First insert the power plug into the wall socket
when the mixer jug e is filled and mounted with
its lid fitted and closed.
• Before mounting the mixing jug always check to
see that the appliance is switched off or that the
power plug has been removed.
• Before removing the mixer jug e , switch the ap-
pliance off, remove the power plug and wait for
the motor to stop revolving.
Filling and mounting the mixer jug
➩
Take the mixer attachment e from the motor unit
u and remove the lid w .
➩
Fill the mixer attachment e and then press the
lid w firmly back onto the mixer attachment e .
Ensure that the pourer nose on the mixer attach-
ment
e is also closed.
➩
Insert the filling cap q into the lid opening and
secure it by turning it clockwise.
➩
Place the ready filled and sealed mixer jug e
onto the motor block u . Lightly turn the mixer
jug e until you can press it down. The motor
can start only when the mixer jug e is securely
positioned.
Selecting operating speeds
When the mixer jug e is filled, completely sealed
and securely fitted to the motor block u , you can
then switch the appliance on.
➩
Place the switch t on ...
– Level 1-3
for fluid or soft foodstuffs, for mixing, blending
and stirring
– Level 3-5
for firmer foodstuffs or for hacking
– Level Ice Crush/Clean
for short, powerful impulse operation, e.g. for
crushing icecubes or when cleaning. So as not
to overburden the motor, the switch
t does not
engage in this position. Hence, hold the switch
t in this position for short periods only.
Notice
Fill the mixer attachment e with a maximum of
180 g of ice cubes. If filled with more than this, the
appliance cannot optimally crush them.
Filling when in use
Warning!
Should you wish to insert further foodstuffs during
operation, you may ONLY open the filling cap
q
provided for this purpose.
• Under no circumstance should you open the lid
w . Pieces of the foodstuff could be thrown out at
high speeds!
• Do not insert cutlery items or mixing tools into
the mixing jug e when the appliance is in use.
There is a considerable risk of injury should these
make contact with the swiftly rotating cutters
r !
To insert something when the appliance is in
operation, ...
➩
turn the filling cap q anti-clockwise and remove
it.
➩
Fill in the ingredients.
➩
Afterwards, replace the filling cap q into the
lid and secure it by turning it clockwise.
IB_61457_SSM550B1_LB4 17.11.2010 13:41 Uhr Seite 4