beautypg.com

Introduction / safety, Energy-saving ceiling lamp, Introduction – Livarno 3940/052L User Manual

Page 6: Proper use, Included items, Description of parts and features, Technical details, Safety safety advice

background image

6 GB

Introduction / Safety

Energy-Saving Ceiling Lamp

Introduction

Please read carefully and completely
through these operating instructions.
Fold out the page with the illustrations.

These instructions form part of the product and
contain important information about bringing the
product into use and its handling. Always observe
all the safety advice. Check that the correct mains
voltage is available and that all the parts have
been properly assembled before bringing into use.
Should you have any questions or be uncertain as
to how to operate the device, please get in touch
with your dealer or service point. Please keep these
instructions in a safe place and hand them on to a
third party if necessary.

Proper use

This light is suitable only for interior use, in dry and
enclosed spaces. The light can be fitted to all normally
inflammable surfaces. This lamp is intended for use
only in a domestic environment.

Included items

Check that all the items and accessories are present
and that the lamp is in perfect condition immediately
after unpacking.

1 Ceiling light, model 3940-052L (5-light)
5 Energy-saving bulbs E14, 9 W
5 Lamp glasses
1 Remote control handset
1 Battery, 12 V , 23A
2 Dowels
2 Screws
2 Ceiling bracket clips
2 Screws (ceiling bracket clips)
1 Tool
1 Operating instructions

Description of parts

and features

1

Mounting bracket with elongated holes

2

Screws

3

Mains connection cable (external)

4

Terminal block

5

Receiver

6

Connection enclosure

7

Flexible arm

8

Spot

9

Remote control handset

10

Ceiling bracket clip

11

Ceiling bracket

12

Fitting (socket)

13

Lamp glass

14

Threaded ring

15

Tool

16

Bulb

Technical details

Ceiling light:
Operating voltage:

230–240 V ∼, 50 Hz

Energy-saving light bulb:

220–240 V ∼,
9 W, E14

Maximum nominal output: 5 x 9 W
Protection class:

I

Remote control receiver:
Rated voltage:

220–240 V ∼, 50 Hz

Max. load capacity:

1000 W

Frequency:

433.92 MHz

Remote control transmitter:
Operating voltage:

12 V , 23 A

Frequency:

433.92 MHz

Safety

Safety advice

The right to claim under the guarantee shall be
rendered invalid in respect of damage caused by

This manual is related to the following products: