Epson GT-10000 - Manual (Page 7)

EPSON GT-10000+
6 - EPSON GT-10000+ 3/01
5. Click the Preview button. You see a preview of your scan in
the window that opens.
6. Choose your scan settings.
Click the Auto Locate button to automatically define
the scan area around the edges of your image. You can also
adjust the scan area by positioning the mouse pointer over
the dotted line around the marquee’s edge and dragging the
box to resize the marquee.
Click the Color Adjustment button and use the Gray
Balance Intensity feature if you need to remove color cast
from your image.
Click the Auto Exposure button to automatically set
the highlight and shadow exposure.
Generally it’s a good idea to use the Auto Exposure
button to obtain the best settings for your scan.
7. When you’ve finished making adjustments, click the Scan
button.
The READY light on the front of the scanner flickers while
it’s scanning. In a few moments, a scanned image is
imported into your host application’s window. Then click
Close to close the EPSON TWAIN Pro or EPSON
TWAIN Pro Network window and return to your
application.
Using a Network Scanner
Network scanning involves the following steps:
❏ Connect the scanner to the scanner server.
❏ Turn on the scanner and scanner server and start EPSON
Scan Server.
❏ Place your first image on the document table (or in the
automatic document feeder).
❏ From the client computer, start the host application, then
start EPSON TWAIN Pro Network to establish a
connection to the scanner server. Only one client computer
at a time can access the scanner server.
❏ Choose the Image Type, Resolution, and other settings you
want for your scan.
❏ Start the scan. Although this can be done from EPSON
TWAIN Pro Network on the client computer, it may be
more convenient to press the scanner’s
] Start button or to
start the scan from the scanner server. Then you can scan
several images with a single trip to the scanner.
❏ If you want to scan more than one image, place your second
image on the document table and press the scanner’s
] Start button again. Repeat this step for every image you
want to scan. (The settings you chose for the first image
apply to these images too.)
❏ When you return to the client computer, your scanned
images appear in the host application’s window. Close
EPSON TWAIN Pro Network to end your connection to
the scanner server and allow other client computers to use
the scanner.
Some applications automatically close the client
computer’s connection to the scanner server
when you press the
]
Start button. You can’t scan
multiple images if you’re using these applications.
Starting a Network Scan
You can start a scan on your network scanner in several ways:
❏ You can start EPSON TWAIN Pro Network on the client
computer, make your scan settings, and click the Scan
button on the EPSON TWAIN Pro Network main
window. The scanned image is imported into your host
application window.
❏ You can press the ] Start button on the scanner to send the
scanned image to the client computer that is currently
connected to the scanner server.
Color
Adjustment
button
Auto
Locate
button
Auto
Exposure
button