Epson ACTIONTOWER 7000 - Manual (Page 6)

EPSON ActionPC 7000, ActionTower 7000, Endeavor 486i
SIMM configurations (continued)
Bank0 Bank1 Bank2 Bank3 Total
(SIM1) Type (SIM2) Type (SIM3) Type (SIM4) Type memory
16MB Single 16MB Single 8MB Double - 40MB
16MB Single 16MB Single 16MB Single - 48MB
16MB Single 16MB Single 8MB Double 8MB Double 48MB
16MB Single 16MB Single 16MB Single 16MB Single 64MB
16MB Single 16MB Single 32MB Double - 64MB
16MB Single 16MB Single 32MB Double 32MB Double 96MB
32MB Double - 32MB
32MB Double - 3 2 M B D o u b l e - 64MB
Double 32MB Double - 64MB
Double 32MB Double 1MB Single 1MB Single 66MB
Double 32MB Double 2MB Double - 66MB
Double 32MB Double 2MB Double 2MB Double 68MB
* If you install SlMMs in both Bank 0 and Bank 1 or Bank 2 and Bank 3, SIMM
types must match.
Use only tin-plated, 32-bit, 72-pin, fast-page mode SIMMs
that operate at an access speed of 80ns or faster. Be sure all
the SIMMs operate at the same speed.
Video Memory
The computer comes with 1MB of video memory. You can
increase the video memory to 2MB by installing two 512KB,
40-pin SOJ flat pack video DRAM chips. (You cannot
increase video memory by installing just one chip.)
Video resolutions and colors
Resolution
640 x 480
800 x 600
1024 x 768
1280 x 1024
Memory Refresh
60/72/75 8 bits/pixel
* Non-interlaced and interlaced
** Interlaced
External Cache
You can install 128KB, 256KB, or 512KB of external cache
with 32K x 8, 64K x 8, or 128K x 8 15ns or 20ns, SRAM DIP
chips and one 32K x 8 15ns or 20ns tag chip. The computer
may already have cache installed.
You must install cache in one of the configurations in the
table below (each bank contains four cache memory sockets).
Cache memory configurations
BANK 0
U23, 24, 25, 26
32K x 8, 28-pin
32K x 8, 28-pin
64K x 8, 28-pin
128K x 8, 32-pin BANK 1
U27, 35, 36, 37
None
32K x 8, 28-pin
64K x 8, 28-pin
None
Processor Upgrades
Tag SRAM
U30
32K x 8, 28-pin
32K x 8, 28-pin
32K x 8, 28-pin
32K x 8, 28-pin
Total cache
128KB
256KB
512KB
512KB
The computer’s processor can be upgraded by replacing the
existing processor with a faster one. The following table lists
supported processors and voltages.
Supported processors
Hard Disk Drive Types
Your computer comes with a hard disk auto-sensing feature.
To use it, select one of the drives you have installed from the
Fixed Disk Setup screen. On the screen that appears for that
drive, press
Enter to select the Autotype Fixed Disk
option. The system detects the type of hard disk drive, fills in
the drive’s parameters, and sets the remaining options on the
screen.
6 - ActionPC 7000, ActionTower 7000, Endeavor 486i 5/19/95