Livarno Z30503-BS - Manual (Page 13)

15 GB
Use
Failure to observe this advice may result in the light falling down
and becoming damaged.
Note: The lamp head can be adjusted through 165° (see Fig. B).
Bring the lamp head
1 into the desired position by articulating
the light at the hinge 3 .
Using the light without the power lead
Fully charge the rechargeable light batteries as described in the
section “Charging the rechargeable light batteries”.
Press the On / Off switch 10 , 11 to switch on the LED work light.
Using the light connected to a power supply
 Arrange the power lead so that it does not create a trip hazard.
 CAUTION DANGER OF ACCIDENT! Do not connect or use
the light if you are in moving traffic, for example driving a vehicle.
The light is not a passenger compartment light or a reading light!
Insert the plug on mains adapter 14 or the cigarette lighter socket
adapter 13 into the connection socket 7 in the handle 4 of the
light.
Insert the mains adapter 14 into a 230 V ~ mains socket or insert
the cigarette lighter socket adapter 13 into the cigarette lighter
socket in your vehicle.
Press the On / Off switch 10 , 11 to switch on the LED work light.
56632_livx_LED-Arbeitsleuchte_Content_LB4.indd 15 29.12.10 13:18